Korg AX1000G Manuel d'utilisateur télécharger pdf (Page 10)

2. Playing the AX1000G

Using the expression pedal as you play

1. In Play mode, select a program that uses the

expression pedal.

2. Make sure that the pedal LED is lit. If it is not lit,

press the expression pedal firmly once to make the

pedal LED light (the pedal will be turned on).

3. Operate the expression pedal while playing your

guitar. As you raise and lower the pedal, the output

sound will change correspondingly.

If Volume is selected in the PEDAL effect block, it will not

be possible to turn the expression pedal on/off. It will

remain on (the pedal LED will be lit).

The on/off status of the expression pedal is not

memorized by each program.

Do not apply excessive force to the expression pedal.

Before operating the expression pedal, verify the amount

of force that is required to make the pedal LED light and

to apply the effect.

Individual mode

In this mode you can press the program switches or

the pedal switch to turn each individual effect block

on/off while you play.

As in Play mode, you can edit the settings, use the

metronome, and write a program.

In this mode it is not possible to switch programs or to

select bypass or mute.

Entering Individual mode

In Play mode press and hold the Bank switch for one

second, and you will enter Individual mode. The name

display will indicate “-INDIV-,” and the bank number

display will indicate “ .”

When you enter Individual mode, the program LED’s

will indicate the on/off status of each effect block

(synchronized with the effect block LED’s).

DRIVE-AMP corresponds to program switch (LED) 1,

CABINET to 2, MODULATION to 3, AMBIENCE to

4, and PEDAL to the expression pedal (pedal LED).

Each time you press a program switch, it will cycle on

or off. For the pedal effect, pressing the expression

pedal firmly will turn it on/off (the switch is located

under the pedal). However for some pedal effects such

as SAMPLE & PLAY, the expression pedal is used in a

special way, and cannot be turned off once the pedal

has been turned on.

For some effects, it is not possible to simultaneously use

the MODULATION and PEDAL effect blocks, or the

PEDAL and AMBIENCE effect blocks. If you attempt to

simultaneously turn on both of these effect blocks in such

a combination, the effect block that was turned on first

will automatically be turned off.

Indication of currently used effect blocks

Exiting Individual mode

To return to Play mode, press either the bank switch or

the EXIT switch.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Commentaires sur ces manuels

Pas de commentaire

Korg AX1000G Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Korg AX1000G