Korg Triton Studio Manuel d'utilisateur télécharger pdf (Page 157)

146

the same global MIDI channel that was used when the

data was transmitted.

To set the MIDI channel of the transmitting device, refer to

the owner’s manual for that device.

3 Either check “Enable Exclusive” (1–1b), or display one

of the page menu commands of this page. When one of

these page menu commands is displayed, data dumps

can be received regardless of the “Enable Exclusive” (1–

1b) setting.

Transmit the data from the other device. For the procedure,

refer to the owner’s manual for the device you are using.

While the data is being received, the display will indicate

“Now received MIDI data.”

2–1: Controller

2–1a: Damper/Assignable Foot Switch, Pedal

Foot Switch Assign [Off...SW 2]

Selects the function that will be controlled by a pedal switch

(PS-1 option [sold separately]) connected to the ASSIGN-

ABLE SWITCH jack (“Foot Switch Assign List” ☞p.251).

Foot Pedal Assign [Off...Knob 4]

Selects the function that will be controlled by a foot volume

pedal (XVP-10 or EXP-2 option [sold separately]) connected

to the ASSIGNABLE PEDAL jack (“Foot Pedal Assign List”

☞p.252).

Damper Polarity [(–)KORG Standard, (+)]

Sets this to match the polarity of the damper pedal con-

nected to the DAMPER jack.

If a Korg DS-1H (sold separately) damper pedal is connected,

the pedal switch polarity will be (↓), so select (–) KORG Stan-

dard for this setting. If you have connected a damper pedal

with a positive (↑) polarity, select (+) for this setting. (↓ is open-

type, ↑ is closed-type.) If the polarity does not match, operating

the damper pedal will not produce the correct result. If no

damper pedal is connected, set this to (–) KORG Standard.

Foot Switch Polarity [(–)KORG Standard, (+)]

Sets this to match the polarity of the pedal switch connected

to the ASSIGNABLE SWITCH jack.

If a Korg PS-1 (sold separately) pedal switch is connected,

the pedal switch polarity will be (↓), so select (–) KORG

Standard for this setting. If you have connected a pedal

switch with a positive (↑) polarity, select (+) for this setting.

(↓ is open-type, ↑ is closed-type.) If the polarity does not

match, operating the pedal switch will not produce the cor-

rect result. If no pedal switch is connected, set this to

(–) KORG Standard.

3–1: User Scale

Here you can make settings for sixteen different User Octave

Scales and one User All Notes scale. The user scales you cre-

ate here can be selected from the following pages.

• Program P1: Edit-Basic, Program Basic page

• Combination P2: Edit-Trk Param, Other page

• Sequencer P2: Trk Param, Other T01–08, T09–16 page

• Song Play P1: Track, Status/Scale T01–08, T09–16 page

If you wish to keep an edited user scale after the power

is turned off, be sure to write (save) your settings.

Use the page menu command “Write Global Setting” or

press the SEQUENCER [REC/WRITE] key to access the

dialog box, and write the data.

3–1a: User Octave Scale

User Octave Scale [User Octave Scale 00...15]

Selects the User Octave Scale that you want to edit.

Tune [–99…+99]

Makes pitch settings for each note in the octave.

When you adjust the pitch of each note in the octave (C–B)

in one-cent steps, your settings will be applied to all octaves.

This adjustment is relative to equal temperament.

A setting of –99 lowers the pitch approximately a semitone

below normal pitch.

A setting of +99 raises the pitch approximately a semitone

above normal pitch.

The note can also be selected by holding down the

[ENTER] key and playing a note on the keyboard.

By executing the page menu command “Copy Scale,”

you can copy settings from a preset scale (other than

Stretch) or from another user scale.

Global P2: Controller

0–1

2–1a

Global P3: User Scale

3–1

3–1a

3–1b

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 321 322

Commentaires sur ces manuels

Pas de commentaire

Korg Triton Studio Manuel d'utilisateur Page 157

Commentaires sur ces manuels

Produits connexes et manuels pour Les dispositifs de saisie Korg Triton Studio