Korg Triton Studio Manuel d'utilisateur télécharger pdf (Page 50)

Combination

P1 P2 P3 P4 P7 P8 P9

2–3: Pitch

Here you can make pitch-related settings for each timbre.

2–3a: Transpose, Detune, Bend Range

Transpose [–24…+24]

Adjusts the pitch of each timbre in semitone steps.

12 units equal one octave.

When “Status” (0–1c, 2–1b) is INT, this parameter will

affect the pitches sounded by the TRITON STUDIO.

When “Status” is EXT, this parameter will affect the

note numbers of the MIDI note messages that are trans-

mitted.

For example if you make settings of +04 and +07

respectively for two timbres that are set to EXT, playing

the C key will transmit a C note number on the global

MIDI channel, and at the same time will also transmit E

and G note numbers on the MIDI channels of those tim-

bres.

Detune (Use BPM Adj. in Page Menu) [–1200...+1200]

Adjusts the pitch of each timbre in one-cent units.

0: Normal pitch.

You can also use the “Detune BPM Adjust” page menu

command to automatically make a detune setting from

a calculation in BPM units.

“Transpose” and “Detune” can be controlled via MIDI

RPN messages. Depending on the “Oscillator Mode”

(Program P1: 1–1a) settings of the programs used by

timbres 1–8, they can be controlled as follows.

When “Oscillator Mode” is Single or Double

MIDI RPN Coarse Tune can be received to control and

change the setting of “Transpose,” and RPN Fine Tune

can be received to control and change the setting of

“Detune.”

When “Oscillator Mode” is Drums

MIDI RPN Coarse Tune and Fine Tune can be received

to control and change the setting of “Detune.” The con-

trollable range is ±1 octave for coarse tune and ﬁne tune

together.

Bend Range [PRG, –24...+24]

Speciﬁes the amount of pitch change that will occur when

the pitch bender is operated, in semitone units.

PRG: The pitch range speciﬁed by the program will be used.

–24–+24: This setting will be used regardless of the setting in

the program.

The MIDI RPN Pitch Bend Change message can be

received to control this and change the setting. (How-

ever it will not be received if this parameter is set to

PRG.) This message is received on the MIDI channel for

each timbre set by “MIDI Channel” (2–1b).

▼ 2–3: Page Menu Command

2–3A: Detune BPM Adjust

If the program of a timbre uses a phrase or rhythm loop

multisample (or sample that was created in the Sampling

mode) is matched to a speciﬁc BPM, you can use this Utility

to modify its BPM value. “Detune BPM Adjust” changes the

BPM of a phrase or rhythm by modifying its pitch.

This is valid only for a timbre when “Detune” is selected.

When this Utility is executed, the selected “Detune” value

will be set automatically. (☞Program P1: 1–2a, 1–2b, Global

P5: 5–1b, 5–1c)

1 Select “Detune BPM Adjust” to access the dialog box.

2 In “From” specify the original BPM value. In “To ” spec-

ify the desired BPM value. The appropriate “Detune”

value will be calculated automatically from these two

values.

For example if you set “From” to 60 bpm and “To ” to 120

bpm, the “Detune” parameter will be set to +1200 (one

octave up).

3 To execute the Detune BPM Adjust command, press the

OK button. To cancel, press the Cancel button.

The detune value that is calculated when you execute

this command will be added to “Detune” +0000. You

must set the “From” BPM value when “Detune” is

+0000. For example if you execute “From” 60 bpm “To ”

120 bpm, and then execute “From” 120 bpm “To ” 60

bpm, will not return to the original result. (Rather, this

will set Detune= –1200, which is one octave down.)

2–3

2–3a

2–1a

0–1A

0–1B

2–3A

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 321 322

Commentaires sur ces manuels

Pas de commentaire

Korg Triton Studio Manuel d'utilisateur Page 50

Commentaires sur ces manuels

Produits connexes et manuels pour Les dispositifs de saisie Korg Triton Studio