Korg Triton Studio Manuel d'utilisateur télécharger pdf (Page 193)

182

4. Controlling the Insert Effects via

MIDI

Using the Dynamic Modulation (Dmod) function enables

you to control all effect parameters in real-time during per-

formance from the controllers of the TRITON STUDIO or a

connected MIDI sequencer. You can also control the Pan

(CC#8),” “Send1,” and “Send2” parameters in the same

way.

4–1. Program mode and Sampling mode

You can control the parameters on MIDI Global channel

(MIDI Channel” (Global P1: 1–1a).

4–2. Combination mode

Use “Ctrl Ch” parameters of the “IFX1–5” pages to set up

the control channels for IFX1, 2, 3, 4, and 5. Select an appro-

priate option from Ch01–16, Gch, and All Routed.

Ch01–16: Select this when you want to control each insert

effect from a different channel. An “*” symbol will be dis-

played at the right of the MIDI channel Ch01–16 of the tim-

bre that is routed to each insert effect. If the routed timbres

have different MIDI channel settings, this parameter is used

to specify the channel that will control the insert effect.

Gch: Select this option if you wish to control the parameters

on MIDI Global channel “MIDI Channel” (Global P1: 1–1a).

This is a common setting.

All Routed: Select this option to control the parameters on

all the channels (channels 1–16 that have a “*” mark) that are

routed to the corresponding Insert Effects.

4–3. Sequencer mode and Song Play mode

Use “Ctrl Ch” parameters of the “IFX1–5” pages to set up

the control channels for IFX1, 2, 3, 4, and 5. Select an appro-

priate option from Ch01–16 and All Routed.

Ch01–16: Select this when you want to control each insert

effect from a different channel. An “*” symbol will be dis-

played at the right of the MIDI channel Ch01–16 of the track

that is routed to each insert effect. If two or more tracks with

differing MIDI channels Ch01–16 are being sent to a single

insert effect, this parameter is used to specify the one track

that will control the insert effect.

All Routed: Select this option to control the parameters on

all the channels (channels 1–16 that have a “*” mark) that are

routed to the corresponding Insert Effects.

“All Routed” is a typical option. If you wish to control the

parameters on a single channel, you may select it from

Ch01–16.

1. In/Out

The I/Os of Master Effects MFX1 and MFX2 are mono-in/

stereo-out. “Send1” and “Send2” determine the send level

to the Master Effects (☞“Routing” and “Mixer”). Stereo sig-

nals will be combined to a mono signal automatically and

sent to the effects.

The Master Effects do not output any Dry signals (signals

that are not processed by the effects). Therefore, they output

only Wet (signals that are processed by the effects) signals

(set via the “Wet/Dry” of the “MFX1” and “MFX2” pages).

The output signals from the Master Effects are routed to the

L/R bus with the output level speciﬁed by “Return1” and

“Return2.” These output signals are mixed with the output

signals from the bus speciﬁed by “BUS Select” (P8: “Rout-

ing” page in each mode) L/R, or with the output signals

from the bus speciﬁed by “BUS Select” (“Insert FX” page in

each mode) L/R, then routed to the Master EQ.

Selecting “000: No Effect” will mute the output. The pro-

cessed signal will be output in one of the following ways,

according to the type of effects 001–089.

The possible routing of effect signal inputs and outputs is

indicated in the upper left corner of the block diagram.

Pressing the ON/OFF button for MFX1 and 2 of the P9: Mas-

ter FX page in each mode will toggle between ON and OFF.

When OFF is selected, the output signals will be muted.

The TRITON STUDIO can also turn MFX 1 and 2 off

separately from the setting of the ON/OFF button by

receiving MIDI control change message CC#94 and

CC#95 respectively. Value 0 will turn them off, and

value 1–127 will turn them on. You can also use “Effect

Global SW” (Global P0: 0–1b) to turn MFX1 and 2 on

and off. This MIDI control is performed on MIDI Global

Channel “MIDI Channel” (Global P1: 1–1a).

Double-size effects

You cannot select double-size effects for Master Effects

MFX1 and MFX2.

Master Effects (MFX1, 2)

Stereo In - Stereo Out

Mono In - Mono Out

Mono In - Stereo Out

Effect

Wet

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 321 322

Commentaires sur ces manuels

Pas de commentaire

Korg Triton Studio Manuel d'utilisateur Page 193

Commentaires sur ces manuels

Produits connexes et manuels pour Les dispositifs de saisie Korg Triton Studio